|
Regulated, switchmode, DC input
battery chargers, for the use of 12 volt battery charging in 48 volt, 54 volt and 60 volt
vehicles. These are attractive, reliable, robust DC/DC battery chargers good for fork lifts,
off-road, construction and recreational equipment.
These battery chargers are fully
isolated.
| 48V to 12V DC-DC battery chargers |
Heavy Duty
60 Amp
DC to DC battery charger
 |
Ruggedized Marine
60 Amp
DC to DC battery charger |
Military Grade
60 Amp
DC to DC battery charger |
Part
Number
and Price |
PBCD1015-48-12
$1790
Allow up to 14 days for shipping
|
PBCD1015-48-12-V
$2059
Allow up to 14 days for shipping
|
PBCD1015-48-12-MIL
$2327
Allow up to 14 days for shipping
|
| Input Voltage |
44 to 60VDC |
| Max Input power at No
Load |
10W idle
power |
|
|
| Nominal Voltage |
13.6 VDC ±0.05V
(12V available, ask at time of order) |
| Output Current(s) |
60 Amps |
| Absorption Voltage |
14.4V |
| Transition Current |
9A |
| Adjustment range |
±1V |
| Operating Temperature
Range |
-25°C to
+40°C |
-25°C to
+40°C |
-40°C to
+55°C |
| Derating |
2.5% per
°C up to +50°C |
2.5% per
°C up to +50°C |
2.5% per
°C from +55°C to +85°C |
| Efficiency |
>80
%
at maximum output |
>80
%
at maximum output |
>80
%
at maximum output |
| Line Regulation |
<±0.5% |
| Load Regulation |
<±0.5% |
| Switching frequency |
60 kHz |
| Output ripple noise |
<50 mV rms |
| Noise inserted on the input
terminals |
<50 mV rms |
| Isolation |
Fully isolated
Input-Case & Input-Output 1500VDC (500VDC Output-Case) |
| Remote power on/off |
No |
| Input Fuse |
20A AGC x 2 |
| Connections |
Input #10 AWG wires
Output four screw terminals |
| Protection |
Over Voltage , Over Current, Short Circuit , Reverse
Polarity , Over Load |
| Dimensions |
368 mm x 251 mm x 127 mm
(14.5 x 9.9 x
5.0 inches) |
| Drawings |
Click Here for Drawing
|
| Weight |
2.1 Kg (4.7 lbs) |
| Audible Noise |
None |
| Warranty |
3 years |
1 Year |
1 Year |
Advantages:
 Heavy Duty, High
Current Switchmode DC/DC battery chargers.
High
efficiency.
Excellent line
and load regulation.
Wide input voltage range suitable for 48 Volt, 54 Volt and 60 Volt
systems. |
