Custom DC/DC Converters
High Power 12V (13.8V) power supplies with very low noise for use with high end audio equipment. Galactic Power

Custom design and manufacture of state-of-the-art battery chargers, UPS, and power supplies for OEMs in a hurry!



1340 watt power supply for marine and commercial audio use line drawing of the high power low noise audio power supplies
PST-APS-100

Suggested Applications: Audio Display, Demo & Show Vehicles Marine & Recreational Vehicles; Battery maintenance & storage Retail Store Displays Industrial Applications (available in 24V output) Communications

High efficiency, switchmode power converters. These AC-DC power supplies have a nominal output voltage of 13.4 volts. They were originally designed to power automobile audio systems in demonstration rooms and trade shows. They have very low ripple and no audio noise. Other output voltages can be made upon request.
These AC/DC Power Converters are ideally suited for the mobile environment. These power supplies feature regulated and filtered outputs which allow for clean audio demonstrations without the slightest hint of noise.
Their low profile design allows for convenient mounting under a display vehicle or behind a display board. APS series power supplies may be used with or without a battery. When combined with a high quality battery, APS units can supply transient surges up to 1000 amps. Can also be used in installations where use of a battery is not possible.
All models except the PST-APS-100 offer dual voltage output. (13.4VDC - 14.4VDC) Virtually Silent Operation All APS Power Supplies utilize an advanced switching design. There is no low frequency transformer hum. Every unit is equipped with a cooling fan that is virtually silent.
The PST-APS Power Supplies all feature thermal control circuitry that engages the fan only when internal temperatures require it (typically 75% of full load). They have small compact sizes compared to the transformer based power supplies. The switch mode technology utilized in APS Power Supplies boasts 86% efficiency. This superior design results in cooler operating temperatures and compact size.
Up to six of these lightweight power supplies (identical models only) can be connected in parallel for even greater current capability.
Adjustable from approximately 11.5 to 15 volts with internal potentiometer

Summary table high power 13.6 volt power supplies
Model number Continuous Amps Input Voltage Output Watts Weight Dual Voltage? UL listed? Dimensions Mounting Drawing AC Service Required Price
PST-APS15 15 108-132 VAC 200 6.2 lbs Yes** Yes 7x6.5x3.5 inches click here for mounting drawing 432VA $132.00
add_to_cart.gifview_cart.gif
PST-APS30 30 108-132 VAC 400 6.9 lbs Yes** Yes 7x6.5x3.5 inches click here for mounting drawing 864VA $208.00
add_to_cart.gif
PST-APS-220-30 30 220 VAC
(216-264VAC)
400 6.9 lbs Yes** Yes 7x6.5x3.5 inches 7x6.5x3.5 inches 864VA $379.00
add_to_cart.gif
PST-APS45 45 108-132 VAC 600 6.9 lbs Yes** Yes 7x6.5x3.5 inches click here for mounting drawing 1296VA $278.00
add_to_cart.gif
PST-APS-220-45 45 220 VAC
(216-264VAC)
600 6.9 lbs Yes** Yes 7x6.5x3.5 inches click here for mounting drawing 1296VA $417.00
add_to_cart.gif
PST-APS55 55 108-132 VAC 740 6.9 lbs Yes** Yes 7x6.5x3.5 inches click here for mounting drawing 1520VA $340.00
add_to_cart.gif
PST-APS-220-55 55 220 VAC
(216-264VAC)
740 6.9 lbs Yes** Yes 7x6.5x3.5 inches click here for mounting drawing 1520VA $478.00
add_to_cart.gif
PST-APS75 75 108-132 VAC 1000 7.8 lbs Yes** Yes 10x6.5x3.5 inches click here for mounting drawing 1944VA $448.00
add_to_cart.gif
PST-APS-EC-8 8 foot polarized extension cord for PST-APS75         $30.00
add_to_cart.gif
PST-APS-HK4         $30.00
add_to_cart.gif
PST-APS90 90 108-132 VAC 1200 7.8 lbs Yes** No* 10x6.5x3.5 inches click here for mounting drawing 2320VA $504.00
add_to_cart.gif
PST-APS100 100 108-132 VAC 1340 7.8 lbs No** No* 10x6.5x3.5 inches click here for mounting drawing 2600VA $558.00
add_to_cart.gif
* The PST-APS90 and PST-ABP100 are designed to exceed UL requirements.

**The dual-voltage feature allows the voltage to change from 13.6 to 14.4 volts by inserting jumper into a socket.

Typical AC outlets are 1540VA, 14 amp service. To run the higher power units you will need higher power service. Please consult competent technical authorities to determine the total load on the circuit you intend to supply the power with, including other things plugged into the same line.

Specifications
Specifications
Parameter Value    
Output voltage 13.6 or 14.4 Adjustable between about 11 and 15.8 volts with screwdriver  
Output voltage tolerance ±0.7% no load  
Maximum ripple and noise 100 mV RMS    
Input voltage rage 96-140 VAC    
Input frequency 47-63Hz    
Typical efficiency >80%    
Short circuit protection Yes    
Overload protection Yes    
Line regulation <1%    
Load regulation <1% at output terminals  
Recommended output wire gauge 4 AWG    
Output terminals 4 AWG screw terminals    
Fan control Proportional-- Fan only comes on when needed  
Fan type Special ultra low audio noise fan     
Over temperature protection 80°C Turns off  
Ambient temperature 0°C to 40°C    
Storage temperature -20°C to 80°C    
Warranty 2 Years    



   
 


[Home] [PowerStream] [Site Map] [Tech Resources]
[Policy and Privacy] [Contact Us]

PowerStream Technology: 140 South Mountainway Drive, Orem Utah 84058
Phone: 801-764-9060, 9062, 9063, or 9064
High Power Laser Diode Drivers Fax: 801-764-9061

 

PowerStream Technology
140 South Mountainway Dr.
Orem, UT 84058
Phone: 801-764-9060, 9062, 9063, or 9064
Fax: 801-764-9061
Map & Directions

 

© Copyright 2000, 2002, 2003, 2005, 2006, 2007 Lund Instrument Engineering, Inc. All rights reserved

High power 12 volt power supplies, 13.6 volt, 13.8 volt, 14.4 volt
PowerStream Home: DC to DC converters, battery packs, power supplies and batteriesBB Battery Sealed Lead Acid Battery data sheets, sizes, and Prices36 volt 3 amp switchmode power supply, desktop style, off the shelf. 36VDCWire Size and Amperage TableThin and ultrathin batteries, lithium polymer batteries from 0.5 mm to 1 mm thick for smart cards, RFIDIn-car wheel chair chargers charge 24 volt sealed lead acid batteries from a 12 VDC power source12 VDC Input Battery Charger for 12 volt Lead Acid and SLA Batteries12 volt to 48 volt 100 watt DC to DC Converter, DC/DC, -48VDCDC input ATX power supplies with 12 volts, 24 volts or 48 volts input for computers run on DC power and in telecom, car, or vehicle applicationsInexpensive capacitive discharge spot welder for batteries,  electron tubes, jewelry, fusion welderHigh reliability AC Laptop and Notebook Adapters, HP, Dell, Compaq, Gateway24 VDC input ATX and ATX-12 style computer power supplies6 to 12 volt DC to DC converters, positive ground to negative ground conversion transformers for vintage cars12 volt DC input ATX power supplies for portable and vehicle applicationsHigh Power 24 volt to 12 volt DC/DC Converters 10 amps to 80 amps12 volt to 1.5, 3, 4.5, 6, 7.5, and 9 volts DC to DC converterPukka Electric mini-bikes and scootersEP Series: Deep Discharge Cycling BB Battery,  HR Series: UPS and High Discharge Rate BB Battery,  EVP Series: High Discharge Rate and Deep Discharge BB Battery,  MPL Series: Large High Capacity Deep Discharge B&B Battery90, 220 Watt mini-ITX power supplies with 12 volt input or automobile inputDC input UPS module for cars and  boats.  12 volt battery backup.Power Supply and Switching Power Supplies from PowerStream 12VDC, 6VDC, 3VDC, 3.3VDC, 9VDC, 15VDC, 16VDC, 18VDC, 24VDC, 36VDC, 48VDCBatteries and batery packs NiMH, NiCad, Lithium Ion, Lithium Polymer, Lithium Thionyl Chloride, Lithium Sulfur, sealed lead acidHigh current 12 volt to 12 volt DC/DC converters for voltage regulation in car and other 12 volt battery applications. Prevents 12VDC equipment from rebooting during voltage sags associated with starting and other brief high power loads and brownouts24 volt input DC converter that is adustable to 1.5, 3, 4.5, 6, 7.5, 9, and 12 volts DC-DC convertersDC/DC converters buck-boost 12 to 12 volt, 24 to 24 volt, and 24 to 19 voltHigh reliabilty car to Laptop power supply and automobile car charger retail salesBattery Chemistry FAQ for a wide variety of common and uncommon battery typesFully isolated 24 volt to 12 volt DC to DC converter for using 12 volt radios in 24 volt equipmentInexpensive 12 volt DC 4.1 amp switchmode power supply with international voltage range and removable IEC C13 calass I input socketLithium Thionyl Primary Cells, high capacity, high current and high temperature versionsDC output battery back up power supplies, 12 and 24 Volt Battery Backup Switchmode Power Supplies, DIN Rail  DC UPS battery back up4 Cell Quick Charger for AA and AAA NiMH, NiCad and nickel metal hydride cellsDC to DC Converter, 24 to 16 volt, 24 to 15 volt, 24 to 14 volt, 24 to 13 VDCBattery Chargers from PowerStream for Lead Acid,  NiCad, NiMH, Lithium Ion and Lithium Polymer batteriesDC output 6 volt battery backup power supply, 35 and 70 watts DC UPS-48 Volt DC/DC ATX-12 computer power supply with dc inputSwitchmode 5 volt 2 amp power supply, desktop style, double insulated designAC/DC power supply with adjustable output for laptops and notebooks 12 volts, 15 volts, 16 volts, 18 volts, 19 volts, 20 volts, 21, 22,  or 24 voltsLithium Polymer BatteriesAC/DC converter, 15 volts DC 8 amp switchmode desktop3VDC, 3.3VDC, 5VDC, 6VDC, 6.5VDC, 7VDC, 8.4VDC Adjustable Switchmode wall mount Power Supply9VDC, 1300 mA Switchmode miniature wall mount Power Supply , 9 volt 1.3 amp small sizePower Humor, engineering jokesWall mount charger for NiMH & NiCad, 3 cell, 4 cell, 5 cell, 6 cell, 7 cell, 8 cell, 9 cell, 10 cell, and 12 cell battery pack chargersSurplus power supplies and batteries from PowerStream including AC/AC  wall mount power suppliesDC/DC Converter directory, DC to DC converters for cars, boats, product development, heavy equipment 12 volt, 24 volt, 36 volt, 48 volt DC to DC converter12 to 24 volt DC-DC converter 275 watts for operating 24 volt equipment in 12 volt vehiclesCar 12 volt to 1.5, Volt 350 mW DC/DC Converter, cigarette lighter  plug9 VDC, 1800 mA Switchmode wall mount Power Supply, 9 volts 1.8 amps12VDC, 2500 mA (2.5 amp) Switchmode wall mount Power Supply, barrel connector output72 volt to 12 volt, DC/DC Buck-Boost converter at low cost. Suitable for operating 12 volt consumer equipment in locomotives and trains which have a 72 volt DC starting system6 Bay Shop Battery Charger for Lead Acid Batteries50 watt nickel metal hydride chargers for 12 volt, 24 volt, and 36 volt battery packs24 volt index12 volt input ATX computer power supplies for carsUPS BatteriesPV Charge Controllers for Solar SystemsDC/DC Converter Catalog ( DC to DC Converter) from PowerStreamPower over Ethernet Power Supply10 Watt DC/DC converter 24VDC, 48VDC, 120VDC input12v power supply and battery indexCharging Lithium Batteries100 Watt NiMH Battery Chargers12 volt power supply and charger indexEuropean NiMH and NiCad battery pack chargerAuto to laptop DC/DC Converter5 V to 3.3 V DC/DC Converter modulePortable 16 Bay Sealed Lead Acid ChargerInstructions for Charger Specification FormConsulting resources from PowerStreamBattery type comparison chartBattery Storage FAQSite MapMultibay Lithium Ion Charger48 volt power supply catalogCustom UPSCustom Power Supplies from PowerStreamMultibay Battery Chargers from PowerStreamCustom Battery Chargers from PowerStreamFast Chargers for Electric Bicycles and ScootersTransformer Based Bicycle and Scooter ChargersHow to charge nickel  metal hydride batteriesHow to charge nickel cadmium batteriesHow to charge sealed lead acid batteries9 Volt NiMH transistor radio battery chargerAC/AC and AC/DC Wall Mount Power Supplies. 3 to 12 VA, 3 to 12 WattsLithium Primary and Coin Cell Primer for Design EngineersPrismatic Lithium Ion CellsHow to design products using Wall Mount Power SuppliesNiCad and NiMH Coin and Button Cell BatteriesBattery pack and charger system for design engineers--NiCad and NiMHEngineering Design Notes for Battery Operated DevicesBattery Pack Intelligent ModuleSpecify Battery ChargersHigh temperature range unterruptable power supplySpecify Power SuppliesNiMH battery pack for bicycles and scootersChart of Standard Cell Sizes UPS for extreme environmentsBattery Technical Resources for Design EngineersHigh Power Chargers for Lead Acid Batteries-48 volt, 20 watt switching power supplyInverters from PowerStreamTechnical Resources4 Amp DC DC converter with adjustable output 6 to 21 volts600 Watt Inverter with Built-in ChargerNiMH and NiCad Batteries from PowerStreamNickel Metal Hydride Chargers from PowerStream25 watt DC/DC convertersSealed lead acid battery size chartChargers for NiMH Battery PacksPST-DC2171 12 to 12, 15, 18, 21, or 24 volt DC DC boost converterInverter FAQBattery Pack Connector Tutorial200 Watt NiMH Chargers100 Watt NiMH Battery ChargersLiIon cells with huge capacity and discharge rateHow to design battery packsTechnical data on the PowerStream 4/3 Fat A NiMH CellBattle Robot Battery Packs, custom engineered for high current12 volt to 6V, 7V, 8V, 9V, 10V, 11V, 12V, 13V, 14V, 15V, 16V, 17V, 18V, 19V, 20V, or 21 Volt DC DC Converter (Adjustable DC DC regulator)Houshold voltages and plugs worldwide15 Watt DC to DC Converter Modules--DC/DC bricksCustom Battery PacksPrimary Lithium Manganese Dioxide CellsPrimary Lithium Sulfur Dioxide CellsPrimary Lithium Coin Cells -- Manganese DioxideLithium Rechargeable Coin CellsInverters for inductive loadsSwitching Power Supply TermsTurn your E-mail account into a FAX machineCell Expert North America Battery Consulting Services40 watt desktop switching power supplies, 3.3 to 24 volts60 Watt desktop switching power supplies 3.3 to 24 VDCWall mount power supplies0.3 to 1.5 watt wall mount AC/AC and AC/DC transformersCharging lithium ion coin cells, external chargerBattery Chargers, Battery Packs, Power Supplies, and DC/DC Converters from PowerStreamDesktop Power Supply ProductCharging lithium ion coin cells, external charger