|
This
battery charger is a microprocessor controlled unit designed exclusively for charging 2 cell
7.2 V or 7.4 V. Lithium-ion and lithium polymer (lipo, li-po, li-poly) battery packs. It has
led indicators to indicate the current operating mode of the charger. This battery charger
complies with applicable safety agency requirements of UL, cUL and CE. This is an 8.4V peak
battery charger.
| Quantity |
|
1-10 |
11-50 |
51-100 |
101-300 |
301+ |
| PST-3P10-L1008 |
For charging 2 cell lithium packs |
$25.25
|
$20.00 |
$16.80 |
$15.10 |
$12.75 |
Output
adapter barrel
plug kit
|
|
$7.00
|
|
|
|
|
|
PST-3P10-L1008 2 Cell Pack Li-ion Battery Charger
|
|
NO |
ITEM |
UNIT |
SPECIFICATION |
REMARK |
|
INPUT |
|
|
|
|
| |
Rating Input Voltage |
V ac |
100~240Vac 50/60Hz |
|
| |
Input voltage range |
V ac |
90~264Vac |
|
| |
Rating Input Current |
A |
0.2Arms |
Test Conditions: INPUT:220V OUTPUT:Full load |
| |
Max. input power |
W |
16 |
|
|
OUTPUT |
|
|
|
|
| |
Rating output voltage |
V dc |
8.4V |
|
| |
Output voltage range |
V dc |
6VDC ~ 8.5VDC |
|
| |
Suit with Battery type |
Ah |
7.2V LI-ION |
|
| |
Constant Charge current |
A |
1.2 A (+0.15A) |
|
| |
Constant Voltage |
V |
8.45V (+-0.1V) |
|
| |
Charge end current |
A |
<0.1 |
|
| |
Typical charge time |
hour |
5~6 hours |
Test Conditions:
For 3.6Ah Li-ion pack |
| |
Max. output power |
W |
11W |
|
| |
Hold-on time |
ms |
20 |
|
| |
Ripple current |
mA |
50 |
Test Conditions:
Input: 220Vac Output: Full load |
| |
Charge finish condition |
|
V>8.3V + I<0.1A |
|
| |
LED color |
|
Red: charging Green: finish/idle |
|
| |
Output short-circuit protect |
|
Yes |
|
| |
Efficiency |
% |
>70% |
Test Conditions:
At max. load |
|
Environment |
|
|
|
|
| |
Operate temperature |
·C |
-10 ~ +40 |
Full load & natural convection. |
| |
Operate humidity |
%RH |
< +90 |
Relative humidity, non-condensing. |
| |
Storage temperature |
·C |
-40 ~ +70 |
|
| |
Storage humidity |
%RH |
0 ~ +95 |
Relative humidity, non-condensing. |
| |
Cooling |
|
Natural convection |
|
| |
Temperature factor |
% |
|
|
| |
Vibration resistance |
|
5MM/50HZ/600S |
Non-operating condition. |
| |
Impact resistance |
|
1 meter drop test >= 3 times |
Non-operating condition. |
|
Mechanical |
|
|
|
|
| |
Weight |
g |
150 |
|
| |
Size |
mm |
75x51x28 mm |
Casing only |
| |
Connectors |
|
5.5 x 2.1 mm barrel, others available on special order in
quantity |
|
|
Safety |
|
|
|
|
| |
Max. temperature rise |
·C |
< 40 on casing |
At any line and Max. Load |
| |
Safety standards |
|
GB4943 UL1950 EN60950 |
|
| |
EMC standard |
|
EN55022 B |
|
| |
MTBF |
hrs |
30000 |
|
| |
Limited power source |
VA |
50 |
|
| |
ESD |
kV |
8.0 |
|
| |
Hi-Pot Insulation |
V |
i/p to o/p: 3000 (1 min.) |
For final unit, cut-off current =10mA |
Specifications:
 Input Voltage:
100 - 240 Vac, 50/60 Hz.
Output Voltage:
Up to 8.4 Vdc controlled by battery charger
Output current: up
to 1.2 A ±0.1 A max., controlled by battery charger
Temperature: -10 to +45° C, Operating -40 to +70° C,
non-Operating
Humidity: Indoor 90% R.H. @ 35° Celsius, Non-Condensing
|
|
