|
Custom design and manufacture of state-of-the-art battery
chargers, UPS, and power supplies for OEMs in a hurry!
This lithium battery charger is a microprocessor controlled unit
designed exclusively for charging 14.4 V or 14.8 V lithium-ion or lithium-polymer battery
packs. It has led indicators to indicate the current operating mode of the charger. This
battery charger complies with applicable safety agency requirements of UL, cUL and CE.
| Quantity |
|
1-10 |
11-50 |
51-100 |
101-300 |
301+ |
PST-3PL3016
INCLUDES A 3-PIN CORD |
For charging 4 cell lithium packs |
$42.5
|
$33.00 |
$26.30 |
$23.50 |
$18.10 |
| Barrel Plug Adapters for PST-3PL3016 |
Output adapter barrel
plug kit
|
$7.00
|
|
|
|
|
|
PST-3PL3016 Li-ion Battery Charger
|
|
NO |
ITEM |
UNIT |
SPECIFICATION |
REMARK |
|
INPUT |
|
|
|
|
| |
Rating Input Voltage |
V ac |
100~240Vac 50/60Hz |
|
| |
Input voltage range |
V ac |
90~264Vac |
|
| |
Rating Input Current |
A |
0.3Arms |
Test Conditions: INPUT:220V OUTPUT:Full load |
| |
Max. input power |
W |
40 |
|
|
OUTPUT |
|
|
|
|
| |
Rating output voltage |
V dc |
16.8V |
|
| |
Output voltage range |
V dc |
12VDC ~ 17VDC |
|
| |
Suit with Battery type |
Ah |
14.4V LI-ION |
|
| |
Constant Charge current |
A |
1.8A ( + -0.2A) |
|
| |
Constant Voltage |
V |
16.8 ± 0.05 |
|
| |
Charge end current |
A |
<0.18 |
|
| |
Typical charge time |
hour |
4 hours |
Test Conditions:For 3.2Ah Li-ion pack |
| |
Max. output power |
W |
30W |
|
| |
Hold-on time |
ms |
20 |
|
| |
Ripple current |
mA |
80 |
Test Conditions:Input: 220Vac Output: Full load |
| |
Charge finish condition |
|
V>16.5V + I<0.18A |
|
| |
LED color |
|
Red: charging Green: finish/idle |
|
| |
Output short-circuit protect |
|
Yes |
|
| |
Efficiency |
% |
>80% |
Test Conditions:At max. load |
|
Environment |
|
|
|
|
| |
Operate temperature |
·C |
-10 ~ +40 |
Full load & natural convection. |
| |
Operate humidity |
%RH |
< +90 |
Relative humidity, non-condensing. |
| |
Storage temperature |
·C |
-40 ~ +70 |
|
| |
Storage humidity |
%RH |
0 ~ +95 |
Relative humidity, non-condensing. |
| |
Cooling |
|
Natural convection |
|
| |
Temperature factor |
% |
|
|
| |
Vibration resistance |
|
5MM/50HZ/600S |
Non-operating condition. |
| |
Impact resistance |
|
1 meter drop test >= 3 times |
Non-operating condition. |
|
Mechanical |
|
|
|
|
| |
Weight |
g |
250 |
|
| |
Size |
mm |
117X61X37 |
Casing only |
| |
Connectors |
|
5.5 x 2.1 mm barrel, others available on special order in
quantity |
|
|
Safety |
|
|
|
|
| |
Max. temperature rise |
·C |
< 40 on casing |
At any line and Max. Load |
| |
Safety standards |
|
cUL, listed under specification UL1310 (ANSI 1310), Class 2 battery
charger, CE |
|
| |
EMC standard |
|
EN55022 B |
|
| |
MTBF |
hrs |
30000 |
|
| |
Limited power source |
VA |
50 |
|
| |
ESD |
kV |
8.0 |
|
| |
Hi-Pot Insulation |
V |
i/p to o/p: 3000 (1 min.) |
For final unit, cut-off current =10mA |
| A 5.5 x 2.1 mm barrel connector is supplied |
|
|
|
|
Optional DC Plugs slip over the 5.5 x
2.1 mm connector if desired.
|
|
- 3.5 OD x 1.35 ID Barrel
- 4.75 mm OD x 1.75 mm ID Barrel EIAJ-03
- 5.0 mm OD x 3.5 mm ID with center pin
- 5.5 mm OD x 2.5 mm ID type 2 Barrel
- 5.5 mm OD x 2.5 mm ID Barrel
- 6.0 OD x 4.5 ID center pin Barrel
- 6.5 mm OD x 3.0 mm ID Barrel
|
|
Specifications:
 Input Voltage:
100 - 240 Vac, 50/60 Hz.
Output Voltage:
Up to 16.8 Vdc controlled by charger
Output current: up
to 1.8 A ±0.1 A max., controlled by charger
Temperature: -10 to +45° C, Operating -40 to +70° C,
non-operating
Humidity: Indoor 90% R.H. @ 35° Celsius, Non-Condensing
|
|
