Custom design and manufacture of state-of-the-art
battery chargers, UPS, and power supplies for OEMs in a hurry!
| PST-SN10-3080 10-11 Cell NiMH and NiCad Battery Pack
Charger |
| |
|
| Battery Type |
Nickel Metal Hydride, or Nickel Cadmium |
| Charge rate |
10 Cell packs 3 Amps peak
11 Cell packs 3 Amps peak
|
| Trickle charge rate |
After the bulk charge is completed a 50-60 mA trickle charge is applied to balance the
cells, it is shut off only when the power or battery pack are disconnected. |
| Pack Size |
500 mAH to 15000 mAH 10 to 11 cells, autosensing |
| Input Voltage |
100-240 VAC 50/60 Hz Universal input |
| Output voltage |
The no-load voltage is 18 volts |
| Overvoltage protection |
The charging is stopped in the event that the battery voltage becomes higher than 16.5
volts ± 0.5 volts. |
| Timeout |
The charger times out after 8 hours |
| Algorithm |
-delta V |
| Dischage function |
Every 30th charge cycle the pack will be discharged to 10 volts, and then automatically
fast charged |
| Size |
180 mm x 120 mm x 68 mm
7 x 4.75 x 2.7 inches |
| Weight |
1 kg, 2.2 pounds |
| Charging cable |
Two wire cable, length 120 cm ± 10 cm, red wire is positive, black wire
negative. |
| AC Adapter |
3-pin IEC computer-style AC socket |
Fast Charge
Algorithm