Robust 24VAC to 24VDC Power Supply, 50 Watts

24 volt AC/DC converters with 19 to 28 VAC input. Made in USA, NAFTA qualified. These are regulated switching power converters (switchmode), designed to allow the use of 24 volt DC equipment in 24VAC security, CCTV camera systems and energy management applications. These 50 Watt converters have been designed to be very rugged electrically and have precise voltage regulation. These are also known as 24 volt rectifiers, and voltage regulators. They can be used whenever 24VAC power is available and 24VDC power is needed, up to 60 watts. Custom output voltages are available by special order, let us know what you need.

Q: I don’t have 60 watts available on my 24VAC line, is it OK to operate the PST-AC2424-2A at lower powers?
A: Yes, you can use this converter at lower powers. The power supply module will only draw the power it needs to supply your load. Of course there must be enough power (watts) available on the 24VAC line to power your load.

Q: How can you regulate the voltage so accurately with such a wide range of input voltages?
A: The PST-AC2424-2.5A is not just a rectifier, it is a fully configured switchmode power supply with a wide range input centered on 24VAC. With the current and voltage feedback loops in the switchmode circuit, the output voltage can be locked solid. This makes the output voltage independent of input voltage or output current.

Q: Does the rectifier add noise to the AC line?
A: No, the sine wave of the AC line is not distorted by the PST-AC2424-2A. Thus you don’t have to worry about noise being transmitted to other devices connected to the 24VAC line. However, most other rectifiers do distort the AC power considerably, especially half-wave and full wave rectifiers.

Advantages:

• Inexpensive Switchmode low voltage AC/DC Converter.
• High efficiency.
• Excellent line and load regulation.
• Wide input voltage range.