PowerStream Power supplies, battery chargers, batteries and packs, dc/dc converters, injection molding    View Shopping Cart
March 7, 2018

1 Amp Lithium-Ion Battery Charger for Three Cell packs

Lithium-Ion Battery Pack Charger 3 cell pack
Lithium-Ion Battery Chargers for OEMs.
Lithium-Ion Battery Pack Charger 3 cell pack
More Lithium Battery Chargers from PowerStream
4 amp, 3 cell lithium ion charger
4 amp off-the-shelf for 3 cell 10.8 volt lithium-ion, lithium-polymer battery packs
This updated version of the "turtle charger" for lithium ion battery packs uses a microcontroller with an optimized charging algorithm. The updated PST-TL03 charger is CCCV mode ( constant current/constant current). It has 1A charging current and safety back up with temperature protection.

The difference is an LED indicator and there is an LED signal if the battery temperature is higher than 50°C.

The updated TL03 charger is compatible for the wide range of battery pack capacity. That means you could charge a 12V 2000mah pack or 12V 8000mAh battery pack using one TL03 charger. It is easy for end-user and convenient for your inventory management.

PST-TL03 three cell lithium ion and lithium polymer battery charger
Quantity 1-10 11-50 51-100 100+
Price $53.40
add_to_cart.gif
$44.50 $42.00 Call
PST-TL03 3-Cell Lithium-Ion Pack Charger
   
Battery Type Lithium-Ion or Lithium-Polymer
Charge rate 1 Amp peak
Pack Size 100 mAH to 8000+ mAH, 3 Cell 10.8 volt nominal
Input Voltage 100-120 VAC 50/60 Hz
(international, automobile or universal on request)
Adapter Voltage 24 VDC 1 Amp
Algorithm Constant current 1 Amp
Constant voltage 12.6 Volts--(4.2 volts per cell)
Size 115 mm x 67 mm x 40 mm
4.5 x 2.6 x 1.6 inches
Weight 120 grams, 4.2 oz, 0.26 pounds
AC Adapter wall plug-in, 1800 mm cord, connector 3.5mm OD x 1.3mm ID barrel

Specifications:

OEM Battery Chargers Input Voltage: 100-120 Vac, 50/60 Hz (universal input 90-260 50/60 available).

OEM Battery Chargers Output Voltage: Up to 16.8 Vdc controlled by charger

OEM Power Supplies Output current: 1.0 A max., controlled by charger

OEM Power Supplies Temperature: -10 to +45° C, Operating -40 to +70° C, non-Operating. Don't charge lithium-ion or lithium-polymer cells if their temperature is below 0° or over 45° C.

Universal Power Input OEM Power Supplies and OEM Battery Chargers Humidity: Indoor 90% R.H. @ 35° Celsius, Non-Condensing


[Home] [PowerStream] [Site Map]
[Tech Resources]
[Policy and Privacy] [Contact Us]

Thank you for considering PowerStream

PowerStream Technology
1163 South 1680 West
Orem Utah 84058

Phone: 801-764-9060
Fax: 801-764-9061

© Copyright 2000, 2002, 2003, 2004, 2005, 2006, 2008,2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Lund Instrument Engineering, Inc. All rights reserved. by Mark W. Lund

Google Author Verification