• Design Studio
• Polymer Molding
• Batteries & Packs
• Battery Chargers
• Power Supplies
• DCDC Converters
• Automotive
• CCTV / Security
• Inverters
• Frequency Converters
• Custom Products
• Technical Resources
• Surplus
• Consulting
• Blog
• Power Humor
• About Us
• Policies
• Site Map
• Our EU Branch
• View Cart

3.3 VDC, 3000 mA (3.0 amp) or 1000mA (1 amp) wall mount power supply for 400Hz operation

400Hz 3.3 volt DC wall-mount power supply, 3000 mA

This is a compact, high quality, 400Hz 3.3VDC switchmode regulated power supply, 10 watts continuous

Quantity	1-10	11-50	51-100	101+
PST-AC0330W 3.3V 3A, 10W wall mount.	$13.75	$12.50	10.25	9.95
PST-AC0310W 3.3V 1Amp 3.3W wall mount	$10.95
PST-WX12 Optional 12 piece Output adapter barrel plug kit	$7.00	Call
Optional adapter SDY-C53F For adapting the barrel connector to screw terminals	$2.50 each
Polarity reversing adapter for center-negative products	$3.50
	$3.25

Note on 400Hz operation: we have tested this power supply design and found that the efficiency does not decrease at 400Hz operation, the power factor and crest factor of the incoming AC change only slightly, and the temperature rise at full power is the same as 60Hz operation.

OVERVIEW
DIMENSIONS			64 X 50 X 26.5 mm
WEIGHT			ABOUT 150g
AC INPUT TYPE			WALL MOUNT
DC OUTPUT Connector			5.5×2.1×10.5 S TYPE Center Positive
Polarity			Center Positive
Optional DC Plugs slip over the 5.5 x 2.1 mm connector if desired.	Optional plug kit			2.35 OD x 0.7 ID Barrel 3.0 OD x 1.1 ID Barrel 3.5 OD x 1.35 ID Barrel 4.0 OD x 1.7 ID Barrel 4.75 mm OD x 1.75 mm ID Barrel EIAJ-03 5.0 mm OD x 3.5 mm ID with center pin 5.5 mm OD x 1.5 mm ID type 2 Barrel 5.5 mm OD x 2.5 mm ID Barrel 6.3 OD x 3.0 ID center pin Barrel 6.0 OD x 4.4 ID center pin Barrel 7.4 mm OD x 5.0 center pin ID Barrel 7.9 OD x 5.6 ID center pin Barrel
DC Output cable			SPT-1 18AWG WIRE
CASE MATERIAL			:94V-0 ABS+PC
PCB MATERIAL			94V-0
SAFETY
COMPLY SAFETY STANDARDS			STANDARD	FILE NO.
UL cUL				E241618
PSE				JQE10993
Form				Double Insulated
LPS				Limited Power Source L.P.S.
				ITE Power Supply
				For Indoor Use
EMI				FCC
QC CHECK
100% Inspection before shipment as specified below:
(1)DC PLUG Polarity CHECK
(2)OCP FUNCTION CHECK
(3)DC OUTPUT VOLTAGE CHECK
(4)HIPOT & INSULATION CHECK
(5)Appearance CHECK