PowerStream Power supplies, battery chargers, batteries and packs, dc/dc converters, injection molding    View Shopping Cart
February 20, 2023

5 Volt, 500 mA wall mount Power Supply with 400Hz input

24 volt, 12 watt low voltage switching power supply, 0.5 amps maximum
400Hz tutorial
400Hz Tutorial
5 volt 500 mA switching power supply with 5.5 x 2.1 mm barrel connector  
Click here for more 400Hz power supplies

This is a 5V power supply with stable output, 2.5 watts continuous and 400Hz operation.

Quantity 1-10 11-50 51-100 101+
Price PST-AC0505W
with 5.5 x 2.1 mm barrel connector
24 volt, 12 watt low voltage switching power supply, 0.5 amps maximum

$9.50
add_to_cart.gif
$7.99 $7.25 $4.99
PST-AC0505W-4.0x1.6
with 4.0 x 1.6 mm barrel connector
$9.50
add_to_cart.gif
$7.99 $7.25 $4.99
PST-WX12
Optional 12 piece Output adapter barrel plug kit
plugset
$7.00
add_to_cart.png
     
Polarity reversing adapter for center-negative products.
This works with the 5.5x2.1mm connector
5.5x2.1mm barrel connector polarity switcher
$3.50
add_to_cart.gif
     
SDY-C53F (ZHJX002)
adapters with a barrel connector input and screw terminal output
To adapt the 5.5x2.1mm barrel connector to screw terminals
$2.50 each
add_to_cart.gif
     

Note on 400Hz operation: we have tested this power supply and found that the efficiency does not decrease at 400Hz operation, the power factor and crest factor of the incoming AC change only slightly, and the temperature rise at full power is the same as 60Hz operation.

.Slimline wall-mount format for placing side-by-side mounting in a wall socket or power strip.
GENERAL SPECIFICATIONS
Safety Compliance: UL, cUL
Size 81mm x 37 mm x 31 mm, (3.1 x 1.5 x 1.2 inches)
Cooling: Free air convection
Construction: Impact resistant thermoplastic enclosure case
Weight: 110 grams, 5 ounces
INPUT SPECIFICATION
Input Voltage: Input Voltage: rating 100-240VAC
Input Connector: WM1 (U.S. 2-blade) as shown
Input Frequency: 47-63Hz, 400Hz
EMI: Meet EN 55022 or FCC Class B
Agency Approvals cUL1950
OUTPUT SPECIFICATION
Output Voltage: 5.0 Volts
Output Current: 0.5 Amps
Output Wattage: 2.5 Watts typical
Output Cord 6 foot, 2 conductor 20 AWG
Output Connector: 5.5 x 2.1 mm barrel connector or
4.0 mm OD x 1.6 mm ID, Center Positive
Overload Protection (OLP) Fully protected against output overload or short circuit. OLP is set at about 120-150% of the rated continuous output.
Optional DC Plugs slip over the 5.5 x 2.1 mm connector if desired.
plugset
  • 2.35 OD x 0.7 ID Barrel
  • 3.0 OD x 1.1 ID Barrel
  • 3.5 OD x 1.35 ID Barrel
  • 4.0 OD x 1.7 ID Barrel
  • 4.75 mm OD x 1.75 mm ID Barrel EIAJ-03
  • 5.0 mm OD x 3.5 mm ID with center pin
  • 5.5 mm OD x 1.5 mm ID type 2 Barrel
  • 5.5 mm OD x 2.5 mm ID Barrel
  • 6.3 OD x 3.0 ID center pin Barrel
  • 6.0 OD x 4.4 ID center pin Barrel
  • 7.4 mm OD x 5.0 center pin ID Barrel
  • 7.9 OD x 5.6 ID center pin Barrel
NOTES: (1) All measurements are at nominal input, full load, and +25°C unless otherwise specified. (2) Load regulation is measured at 230Vac or 120VAC in percentage to indicate the change in output voltage as the load is varied from half load to full load (±%). (3) The exact obtainable load regulation depends upon the output cord selected and load current.

OEM Battery Chargers Switchmode power supply with fixed 5 volt output voltage.


[Home] [PowerStream] [Site Map]
[Tech Resources]
[Policy and Privacy] [Contact Us]

Thank you for considering PowerStream

5 volt regulated wall mount switchmode power supply, 5V

PowerStream Technology
1163 South 1680 West
Orem, Utah 84058
USA

Phone: 801-764-9060
Fax: 801-764-9061

© Copyright 2000, 2002, 2003, 2004, 2005, 2006, 2008,2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Lund Instrument Engineering, Inc. All rights reserved.

Google Author Verification