• Design Studio
• Polymer Molding
• Batteries & Packs
• Battery Chargers
• Power Supplies
• DCDC Converters
• Automotive
• CCTV / Security
• Inverters
• Frequency Converters
• Custom Products
• Technical Resources
• Surplus
• Consulting
• Blog
• Power Humor
• About Us
• Policies
• Site Map
• Our EU Branch
• View Cart

24 Volt DC and 2500 mA switchmode miniature desktop power supplies 400 Hz input.

Quantity	1-10	11-50	51-100	101-500	501+
Price PST-AC2425 includes US 2 prong power cord	$19.50	$16.50	$15.60	$13.75	$11.60
PST-WX12 Optional 12 piece Output adapter barrel plug kit	$7.00
Polarity reversing adapter for center-negative products	$3.50
SDY-C53F (ZHJX002) To adapt the barrel connector to screw terminals	$2.50 each

Note on 400Hz operation: we have tested this power supply and found that the efficiency does not decrease at 400Hz operation, the power factor and crest factor of the incoming AC change only slightly, and the temperature rise at full power is the same as 60Hz operation.

GENERAL SPECIFICATIONS	PST-AC2425 (replaces the PST-AC2419)
INPUT SPECIFICATION
Input Voltage:	Input Voltage: rating 100-240VAC
Input Frequency:	47-63Hz, 400 Hz
Safety Compliance:	FCC, CE double insulated, indoor use
Size	120 mm x 45 mm x 35 mm (4 x 1.4 x 1.75 inches)
Weight:	260 grams, 9.3 ounces
Cooling:	Free air convection
Construction:	Impact resistant thermoplastic enclosure case
OUTPUT SPECIFICATION
Output Voltage:	24.0 Volts
Output Current:	2.5Amps, 2500 mA
Output Wattage:	60 Watts typical
Output Connector:	5.5 mm OD x 2.1 mm ID
Output Polarity	Center Positive
Output Cord	6 foot, 2 conductor 18 AWG FT2 coax
Input Connector:	IEC C14, three prong input socket allows cords for any country to be used, the North American cord is included.

A 5.5 x 2.1 mm barrel connector is supplied     Optional DC Plugs slip over the 5.5 x 2.1 mm connector if desired.			2.35 OD x 0.7 ID Barrel 3.0 OD x 1.1 ID Barrel 3.5 OD x 1.35 ID Barrel 4.0 OD x 1.7 ID Barrel 4.75 mm OD x 1.75 mm ID Barrel EIAJ-03 5.0 mm OD x 3.5 mm ID with center pin 5.5 mm OD x 1.5 mm ID type 2 Barrel 5.5 mm OD x 2.5 mm ID Barrel 6.3 OD x 3.0 ID center pin Barrel 6.0 OD x 4.4 ID center pin Barrel 7.4 mm OD x 5.0 center pin ID Barrel 7.9 OD x 5.6 ID center pin Barrel