• Design Studio
• Polymer Molding
• Batteries & Packs
• Battery Chargers
• Power Supplies
• DCDC Converters
• Automotive
• CCTV / Security
• Inverters
• Frequency Converters
• Custom Products
• Technical Resources
• Surplus
• Consulting
• Blog
• Power Humor
• About Us
• Policies
• Site Map
• Our EU Branch
• View Cart

36 VDC, 3 Amp Switchmode 100 Watt Power Supply, 400Hz input

Quantity	1-10	11-50	51-100	101+
Price PST-AC3603 includes US cord	$105.00	$98.00	$80.00	Call
PST-WX12 Optional 12 piece Output adapter barrel plug kit	$7.00
Polarity reversing adapter for center-negative products	$3.50
SDY-C53F (ZHJX002) To adapt the barrel connector to screw terminals	$2.50 each

Note on 400Hz operation: we have tested this power supply and found that the efficiency does not decrease at 400Hz operation, the power factor and crest factor of the incoming AC change only slightly, and the temperature rise at full power is the same as 60Hz operation.

PST-AC3603	36 Volt 3 Amp power supply
GENERAL SPECIFICATIONS
Safety Compliance:	CE, Double Insulated
Power Density:	4.1 Watts per Cubic inch
Size	63 mm x 165 mm x 38 mm, (2.5 x 6.5 x 1.5 inches)
Weight:	410 grams, 15 ounces
Cooling:	Free air convection
Construction:	Impact resistant thermoplastic enclosure case
INPUT SPECIFICATION
Input Voltage:	Input Voltage: rating 100-245VAC
Input Connector:	IEC 2 prong removable AC cord
Input Frequency:	50/60 Hz, 400Hz
Input Current:	0.6A @ 115VAC, 0.30A @ 230Vac typical
OUTPUT SPECIFICATION
Output Voltage:	36.0 Volts
Output Current:	3 Amps
Excellent Efficiency	88% at half load, 87% at full load
Output Wattage:	100 Watts typical
No load overhead	1.9 watts at 110VAC input 3.3 watts at 220VAC input
Output Connector:	5.5 mm OD x 2.1 mm ID
Output Polarity	Center Positive

A 5.5 x 2.1 mm barrel connector is supplied
Optional DC Plugs slip over the 5.5 x 2.1 mm connector if desired.			2.35 OD x 0.7 ID Barrel 3.0 OD x 1.1 ID Barrel 3.5 OD x 1.35 ID Barrel 4.0 OD x 1.7 ID Barrel 4.75 mm OD x 1.75 mm ID Barrel EIAJ-03 5.0 mm OD x 3.5 mm ID with center pin 5.5 mm OD x 1.5 mm ID type 2 Barrel 5.5 mm OD x 2.5 mm ID Barrel 6.3 OD x 3.0 ID center pin Barrel 6.0 OD x 4.4 ID center pin Barrel 7.4 mm OD x 5.0 center pin ID Barrel 7.9 OD x 5.6 ID center pin Barrel