PowerStream Power supplies, battery chargers, batteries and packs, dc/dc converters, injection molding    View Shopping Cart
February 7, 2022

Custom injection molded potting shells

Sometimes you need a better potting shell. PowerStream's low cost injection mold technology makes it possible to make even low quantities of custom potting shells inexpensively. Shown below are three examples. The top one is designed for the potted circuit to be mounted outdoors on a pole. The other two are used in our vehicle UPS products. Here is an opportunity to make your prototypes by 3-D printing, then move to injection molded potting shells.
 large potting shell bottom large potting shell 3.6 x 4.6 x 0.9 inch
medium potting shell medium potting shell bottom 2.5 x 3.5 x 0.35 inch cavity
small potting shell top small potting shell top 1.9 x 2.9x 0.4 inch cavity 
Material: Potting boxes can be made from a variety of polymers. The three above use ABS or engineering grade co-polymer. Options include potting material compatibilities, solar tolerance, solvent resistance and exposure to lubricants. Material types, colors, and textures are all possible. We have a materials scientist on staff and he knows where to get the good polymer.
Made in the USA.

[Home] [PowerStream] [Site Map]
[Tech Resources]
[Policy and Privacy] [Contact Us]

Thank you for considering PowerStream

PowerStream Technology
1163 South 1680 West
Orem, Utah 84058

Phone: 801-764-9060
Fax: 801-764-9061

© Copyright 2000, 2002, 2003, 2004, 2005, 2006, 2008,2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Lund Instrument Engineering, Inc. All rights reserved.

Google Author Verification