• Design Studio
• Polymer Molding
• Batteries & Packs
• Battery Chargers
• Power Supplies
• DCDC Converters
• Automotive
• CCTV / Security
• Inverters
• Frequency Converters
• Custom Products
• Technical Resources
• Surplus
• Consulting
• Blog
• Power Humor
• About Us
• Policies
• Site Map
• Our EU Branch
• View Cart

12 Volt to 6.5
Volt DC/DC Voltage Converters (Regulators)

10Watt 12 to 6.5 volt DC/DC converters at low cost. Suitable for voltage stabilization of automobile electronics, special purpose UPS, etc.

Model Number PST-DAA1265-2	Not available at this time, sorry. Click here for more 12 input DC converters, some of which can be adjusted to 6.5VDC
Input Voltage Range	10 VDC to 15 VDC Nominal 24 VDC
Peak Output Power	10. Watts
Peak Output Current	1.5 Amps
Continuous Current	1.5 Amps
Continuous Output Power	9.75 Watts
Output Voltage	6.5 volts DC
Output voltage options	6.5V
No-Load Overhead	20 mA
Load Regulation	± 3.4%
Line Regulation	± 0.3%
Efficiency	>70% at full load
Output Ripple	< 40 mV p-p
Topology	Fully Isolated Buck Converter, case isolated
Isolation	Input-- Output 1500VDC Input -- Chassis 1500VDC Output -- Chassis 500VDC
Protections:	Input Polarity Protect Input Fuse Output Current Limited
Temperature	0 to 45°C (32 to 113°F)
Dimensions	40 x 150 x 44 mm 1.6 x 5.9 x 1.7 inches Click here for dimensioned drawing
Weight	200 grams, 7 oz
Connection	Flying wire leads input, 5.5 mm x 2.1 mm barrel connector output (on a 5 inch zip cord)
	PST-DAA1206.5 12V to 6.5V (other output voltages are available on special order)

Advantages:

Inexpensive high current DC/DC converter stabilizes voltage in automotive and railroad applications that require 6.5 volts.

Also can be used to provide regulated 5 volts from a sealed lead acid battery--excellent for special purpose UPS DC battery backups.

DC input and output LEDs, input fuse protection, input polarity protection, output current limit.