PowerStream Power supplies, battery chargers, batteries and packs, dc/dc converters, injection molding    View Shopping Cart
October 15, 2019

300 Watt 12 volt to 24volt DC/DC Converter Industrial Grade, with wide range input 11-16VDC for marine applications, boats and yachts

12V input DC/DC voltage boost converter  300 W with wide input voltage range

Common ground 400 Watt 24 volt to 12 volt DC/DC converter. Suitable for voltage conversion of boat and yacht electronics, and telecom equipment

12V input DC/DC converter catalog
More DC/DC converters with12V input

For more 24 volt products from PowerStream click here:More DC/DC Converters

This common negative 300 watt boost converter, 10A is useful for voltage conversion to operate 24 volt electronics off 12V vehicles, golf carts, fork lifts and telecom busses, best for radios, stereos, DVDs, CB radios, transmitters. This DC to DC converter closely regulates the output voltage over a range of input voltages 12V-16V.

"Common negative" means that the input and output grounds are connected, useful in most applications where there is a negative ground, such as cars, boats and yachts.
DC-DC Converter Marine grade boost Converter
10 Amp
DC to DC Converter
24V to 12V  DC/DC converter, heavy duty industrial 400 watts
Part Number
and Price
PSEC-620
$418
add_to_cart.gif
Input Voltage 11 to 16 VDC
Max Input current at No Load 210 mA when "on"
2mA when "off"
Output Voltage Nominal 13.6-13.8 VDC factory set, internally adjustable
Output Voltage for Standard Product 25.5 ± 0.040 VDC
Max Output Current(s) 10 Amps
Max Output Power 300 watts peak
Output current limit? Yes, electronic knee at power limit
Operating Temperature Range -40°C to +40°C no derating
Derating 1.5% per °C from 40°C to +60°C
Efficiency >92 % at full load
Line and load regulation <±40mV
Low voltage input shutdown 19-21VDC
High voltage input shutdown >64VDC
Switching frequency kHz
Output ripple noise <50 mV rms
Remote power on/off No
Input Fuse Yes, replaceable
Connections Input: Screw Terminal Block, Magum 602-3
Output: Screw Terminal Block, Magum 602-3
Protection Over Voltage , Over Current, Short Circuit , Reverse Polarity , Over Load
Over temperature protection Yes , auto reset
Reverse polarity protection By externally replaceable fuse
Power line communcations -RF signal transparency - High-pass filters allow RF signals injected at the input terminals to pass to the output terminals giving PLC-4 compatibility.
Humidity <95% non-condensing
Altitude 6000 meters
Dimensions 198 x 175 x 91 mm (7.8 x 6.9 x 3.6 inches)
Mounting centers 7.30 x 3.38 inches
Weight 2.75 Kg (6 lbs)
Audible Noise None
Cooling Convection, no fan
Potting Internally encapsulated for moisture and corrosion resistance

Advantages:

OEM Battery Chargers High current DC/DC voltage converter stabilizes voltage for equipment designed for automotive applications that require 24 volts from a 12V (11 to 16) volt source.

OEM Battery Chargers The PSEC-620 DC/DC Converter can be used to provide regulated 24VDC from 12 volt boats and yachts.

OEM Power Supplies High efficiency DC/DC Converter >92%.


[Home] [PowerStream] [Site Map]
[Tech Resources]
[Policy and Privacy] [Contact Us]

Thank you for considering PowerStream

Monday, 24-Feb-2020 02:56:39 EST

PowerStream Technology
1163 South 1680 West
Orem Utah 84058

Phone: 801-764-9060
Fax: 801-764-9061

© Copyright 2000, 2002, 2003, 2004, 2005, 2006, 2008,2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Lund Instrument Engineering, Inc. All rights reserved.

Google Author Verification