• Design Studio
• Polymer Molding
• Batteries & Packs
• Battery Chargers
• Power Supplies
• DCDC Converters
• Automotive
• CCTV / Security
• Inverters
• Frequency Converters
• Custom Products
• Technical Resources
• Surplus
• Consulting
• Blog
• Power Humor
• About Us
• Policies
• Site Map
• Our EU Branch
• View Cart

High power rugged DC/DC converter for supplying 24V to DLXi thermal printers. Works with all Congitive printers with the 4 prong power DIN connector.

ED1010-69 AKA ED1010-78 In Stock.

Power-Mini-Din connector

$107.50

These are Boost Converters. They increase voltage from 12VDC input to the 24VDC output required to power a Cognitive thermal printer.

Model Number	ED1010-69 DC to DC Converter
Input Voltage Range	11 VDC to 16 VDC
Peak Output Power	140 Watts
Peak Output Current	5A, 6A peak
Continuous Output Power	120 Watts
Output Voltage	24 volts DC fixed at factory
Efficiency	>87 Typical
Operating Temperature	0 to 40°C
Storage Temperature	-20 to 80°C
Isolation	Although the output is isolated from noise, spikes, and voltage sags on the input, the input and output grounds are common, so this dc to dc converter is not usable in positive ground cars without totally isolating the equipment being powered from the frame of the car.
Protections	Input voltage protection Over current protection Over voltage protection Over temperature protection Short circuit protection
Burn in	100% burn in
MTBF	>30,000 hours
Indicator	LED power-on
Line Regulation	± 2%
Load Regulation	± 5%
Ripple and noise	1.2% Vp-p
Efficiency	>90%
Dimensions	115 x 55 x 34 mm 4.5 x 2.2 x 1.3 inch
Weight	300 g, 10.6 oz
Certifications	e1 Mark, CE, ROHS
EMI	EN55022
EMS	EN55024
Operating Temperature	0-40°C
Storage Temperature	-20°C to +85°C
DC Input connector	Cigarette lighter plug with UL1185 DC cable
DC Output connector	18AWG cable UL1185 rated, 120 cm long (47 inches) with 4-Pin power DIN connector

Advantages:

Quality high current DC/DC converter for thermal printers.

High efficiency >85%.