Heavy duty industrial grade pure sine wave DC/AC inverters,
125VDC input, 480VAC 60Hz 3-phase output, 6000 watts
The range of 125VDC input
is 105-145VDC
Very rugged and reliable.
Isolated, can be used in positive or negative ground
applications.
Outputs of 208VAC, 380VAC or 415VAC also available, contact
us.
Extra heavy filtering to isolate noise from equipment sharing
the same battery
Crystal controlled for precise timing for digital clocks and
controllers
Suitable for any installation that requires less than 6000
watts continuous.
Low voltage warning and shutdown to protect the
batteries
Illuminated on-off switch
Pure sine wave exactly duplicates industrial 3-phase
current.
Manufactured in accordance with COTS standard IPC-A-610.
Ultra quiet with no electrical interference.
6000 watt DC/AC inverters
125 volts DC to 480 VAC (outputs of 208VAC, 380VAC or 415VAC also
available, please e-mail or call)
Part
Number and Price
ITP6000R-125-480-T9987-60Hz Allow up to 8-12 weeks for
manufacturing $14110
Input
Voltage
105-145VDC
Output
Voltage
480VAC 3-phase
Output
Frequency
60 Hz pure sine wave, 50Hz also available, please call
Output Power
5000 VA, 7 Amps RMS per phase
Configuration
All neutrals are connected to chssis in Y configuration
Load Crest
Factor
2.5 at 90% load
Output current
limit?
Yes
Operating
Temperature Range
0°C to +50°C
Humidity
5-95% non-condensing
Efficiency
83% minimum at full load
Duty Cycle
Continuous power 24 hours per day
Harmonic
Distortion
<5% at full load
Line
Regulation
< ±6%
Load
regulation
< ±6% over the range of 10% load to 100% load
Temperature
Drift
<0.05% per °C over operating temperature range
Isolation
1500VDC Input to chassis, 2250VDC Output to chassis, neutrals are connected to
the chassis internally
Remote power
on/off
No
Input Connections
Inputs: Terminal block, 2 x Phoenix 100A
Output
Connections
Output: 4-pole terminal block, 13mm spacing
Input
Protection
Thermal fuse, Inrush current limiting, Reverse polarity protection,
low input voltage will not damage inverter
Output
Protection
Current limiting with short circuit protection, thermal shutdown
with automatic recovery in case of continuous overload or insufficient
airflow. Output failure alarm.
EMI
Meets EN55022 Class A conducted emissions
Agency
compliance
Designed to meet common safety standards
Dimensions
Two 3U7 cases, each with sizes: 432 x 132 x 407mm 17” x
5.2” x 16” 19 inch rackmount
Weight
26 Kg (57lbs)
MTBF
95,000 hours at 45°C excluding fans
Cooling
High quality fans
Warranty*
2 years *Warranty depends on installation within good engineering
practice.
