PowerStream Power supplies, battery chargers, batteries and packs, dc/dc converters, injection molding    View Shopping Cart
February 3, 2022

Heavy industry grade pure sine wave DC/AC inverters, 200VDC to 400VDC input, 110VAC or 220VAC output, 1200 or 2400 watts

Pure Sine Wave Inverters 1200 watts, 125VDC input
  • Ultra quiet with no electrical interference.
  • Most common input voltages 250VDC, 300VDC, 350VDC
  • Pure sine wave exactly duplicates household current.
  • Manufactured in accordance with COTS standard IPC-A-610.
  • Crystal controlled for precise timing for digital clocks and controllers
  • 1200VA inverter can supply 2400W for 10 seconds, 1440W for 1 minute for surge and startup for computers, electric motors, shop vacuums, and air conditioners.
  • 2400VA inverter can supply 4800W for 10 seconds, 2880W for 1 minute
  • Low voltage warning and shutdown to protect the batteries
  • The inverter is protected against condensation and are enhanced with vibration protection that meets or exceeds MIL-STD810H, Method 514-3 and Cat-1 Proc 1. C.O.T.S. products are designed to meet EMC radiated and conducted emissions MIL-STD 461E.
  • Extra heavy filtering to isolate noise from equipment sharing the same battery
  • Isolated, can be used in positive or negative ground applications.
  • Thermostatically controlled fan comes on only when needed.
  • Ingress rated IPX1 and IP4Y.

1200 watt DC/AC inverters 300 volts DC to 115 VAC
1200VA
300 volts DC to 220VAC
1200VA
300VDC to 115VAC
2400VA
300VDC to 220VAC
2400VA
Part Number
and Price
IPSi1205-250-110
Allow up to 8-12 weeks for manufacturing
$2321
add_to_cart.gif
IPSi1205-250-220
Allow up to 8-12 weeks for manufacturing
$2399
add_to_cart.gif
IPSi2405-250-110
Allow up to 8-12 weeks for manufacturing
$2821
add_to_cart.gif
IPSi2405-250-220
Allow up to 8-12 weeks for manufacturing
$2899
add_to_cart.gif
Country of Origin Canada, NAFTA eligible Canada, NAFTA eligible Canada, NAFTA eligible Canada, NAFTA eligible
Input Voltage 200-400VDC 200-400VDC 200-400VDC 200-400VDC
Input Current < 20A < 20A < 40A < 40A
Output Voltage 110VAC ± 2 220VAC ±4 115VAC ± 2 220VAC ± 4
Output Frequency 60 Hz or 50Hz pure sine wave
User selectable frequency
Continuous Ouput Current 11 Amps 5.5 Amps 22 Amps 11 Amps
Peak Output Current 22A 10 seconds
13A 60 seconds
11A 10 seconds
6.5A 60 seconds
44A 10 seconds
26A 60 seconds
22A 10 seconds
13A 60 seconds
Output Power 1200 VA 1200 VA 2400 VA 2400 VA
Load Crest Factor 3 3 3 3
Overvoltage protection > 400 VDC
Undervoltage protection < 180 VDC
Output current limit? Yes
Operating Temperature Range 0°C to +50°C
Humidity 5-95% non-condensing
Efficiency 80 % minimum at full load
Duty Cycle Continuous power 24 hours per day
Harmonic Distortion <5% at full load
Line Regulation < ±0.5%
Load regulation < ±6% over the range of 10% load to 100% load
Temperature Drift <0.05% per °C over operating temperature range
Isolation 1200VDC Input to output 2250VDC, Output to chassis 2250VDC
Remote power on/off Optional
Connections AC OUT 2x - Universal AC Receptable S.203013
AC Out 1x Phoenix VDFK4 terminal block

DC In Phoenix VFK-4 terminal block for AWG 10-24 wire
Wiring recommenations Output AWG 10-20
Input AWG 10-16
Output AWG 10-22
Input AWG 10-16
Output AWG 10-16
Input AWG 10-12
Output AWG 10-20
Input AWG 10-12
Input Protction Thermal fuse, Inrush current limiting, Reverse polarity protection
Output Protection Current limiting with short circuit protection, thermal shutdown with automatic recovery in case of continuous overload or insufficient airflow
EMI Meets EN55022 Class A
Agency compliance Compliance to C22.2 No. 107.1 - 01 and UL 458
Dimensions 5.6 x 11.75 x 18.68 inches
13.5 x 35.1 x 42.5 cm
Weight 24 Kg (52.5 lbs)
Cooling Fan comes on when needed
Warranty* 5 years *Warranty depends on installation within good engineering practice.

Proven in the following applications:

  • Marine / Automotive / RV
  • Electric Utilities and Substations
  • Telecom Power Plants
  • Manufacturing Locations
  • Steel Mills
  • Military Applications (COTS)
  • Industrial Controls
  • OEM Applications
  • Solar / Alternative Power Systems
  • Fuel Cells


[Home] [PowerStream] [Site Map]
[Tech Resources]
[Policy and Privacy] [Contact Us]

Thank you for considering PowerStream

PowerStream Technology
1163 South 1680 West
Orem, Utah 84058
USA

Phone: 801-764-9060
Fax: 801-764-9061

© Copyright 2000, 2002, 2003, 2004, 2005, 2006, 2008,2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Lund Instrument Engineering, Inc. All rights reserved.

Google Author Verification