PowerStream Power supplies, battery chargers, batteries and packs, dc/dc converters, injection molding    View Shopping Cart
February 27, 2024

12V 5.5A battery chargers for lead acid, SLA, sealed lead acid, Gel, AGM and VRLA batteries

12V battery chargers, 24V battery chargers, 36V battery chargersMore lead acid battery chargers 6V, 12V, 18V, 36V, 42V, 48V

12 volt 5 amp lead acid battery charger

PowerStream now offers a series of CE and TUV listed fast 12 Volt battery chargers for sealed lead acid batteries specifically designed for the personal electric vehicle market. They are based on switchmode technology, which makes them more efficient and smaller than the old fashioned transformer chargers, and are microprocessor controlled to make them very accurate. They are good for all kinds of batteries, including flooded lead acid, and will prevent sulfation if used in battery-keeper mode. It is a simple to use, robust charger for use wherever 12V batteries are charged.
This charger replaces the PST-A100-12 with higher power and smaller size and weight with the added bonus of the charge status indicator.
Quantity 1-10 11-50 51-100 101-500 501+
PST-G100-12AB 5.5x2.1mm barrel connector
Includes USA 3 prong power cord
Precision multistage battery charger For charging 12V Pb-Acid batteries at 5.5 amps
$55
add_to_cart.gif
$52 $44 $32 $29
Barrel connector socket 5.5x2.1mm to alligator clip adapter with 18 inch zip cord in between Alligator clip adapter $3.25
add_to_cart.gif
       
plugset  PST-WX12 ---- Output adapter barrel plug kit  $7.00
add_to_cart.gif
       

PST-G100-12 12V Lead-Acid Battery charger


ITEM

UNIT

SPECIFICATION

REMARKS

01

Rated Input Voltage

VAC

100~240VAC 50/60Hz

   

02

Input voltage range

VAC

90~264VAC

 

03

Rated Input Current

A

1.3A rms

Measured with:

INPUT: 120V OUTPUT: Full load

04

Maximum input AC power

W

90

 

05

Battery Charger Voltage Output

VDC

13.8V

 

06

Output voltage range

VDC

10VDC ~ 15VDC

 

07

Recommended Battery types

 

12V 20 ~ 90Ah VRLA, SLA, Gel, Flooded, sealed lead acid

It will accurately charge any size lead acid battery, but for small batteries (<20AH) the charge indicator lights might not be accurate, and for large batteries (>90AH) it will take a long time to charge.

08

Battery charger current

A

5A± 0.4A

This won't hurt your battery no matter what the battery manufacturer says is the maximum charge current, since this is a sophisticated, tightly regulated, multistage charger

09

Bulk Charging Voltage Limit

V

14.7V ± 0.1V

 

10

Floating charge voltage limit

V

13.8V ± 0.1V

 

11

End-of-charge current

 

I < 0.8A

 

13

Max. output power

W

81W

 

14

Typical charging time

hours

~4 hours

For 20Ah VRLA battery.

15

Ripple current

mA

300

Input: 230VAC Output: Full load

16

Charge Mode

 

Auto 4 stages

Soft start, constant current, constant voltage, float.

17

LED indicator

 

Red power light

Green all flashing indicates a short or reverse polarity


LEDs cycling indicates charging. As the battery fills up the LEDs will turn fully on indicating 25%, 50%, 75% or 100% of charge.
If green light one is on and the other green lights are not cycling the charger is in de-sulfation mode.

If the red light pulses slowly the battery voltage is higher than the charge voltage, the charger is waiting until it comes back into range.

18

Output Short Protection

Output Reversed Polarity Protection

 

YES

YES

 

19

Efficiency

%

83%

At maximum. load

20

Operating temperature

°C

-20 ~ +50

Full load & natural convection.

21

Operating humidity

%RH

< +90

Relative humidity, non-condensing.

22

Storage temperature

°C

-40 ~ +70

 

23

Storage humidity

%RH

0 ~ +95

Relative humidity, non-condensing.

24

Cooling

 

Natural convection

 

25

Impact

 

1 meter drop test 3 times

Non-operating condition.

IP Rating IP54, dust protected, water splash resistance      

26

Weight

g

400g

 

27

Size

mm

170 X 71 X 51 mm

Casing only

28

Input/Output Cord &Terminals

 

Input cord is an IEC-C14 C15 removable cordIEC-C14 sketch


Output is a 5.5 x 2.1mm barrel connector.
 

Safety

29

Max. temperature rise

°C

< 40 on casing

At any line and Max. Load


Safety standards

CE, TUV listed

EN60335 UL1310

 
 

User's manual

  Click here for user's manual  
Twelve optional DC Plugs slip over the 5.5 x 2.1 mm connector if desired.
plugset
  • 2.35 OD x 0.7 ID Barrel
  • 3.0 OD x 1.1 ID Barrel
  • 3.5 OD x 1.35 ID Barrel
  • 4.0 OD x 1.7 ID Barrel
  • 4.75 mm OD x 1.75 mm ID Barrel EIAJ-03
  • 5.0 mm OD x 3.5 mm ID with center pin
  • 5.5 mm OD x 1.5 mm ID type 2 Barrel
  • 5.5 mm OD x 2.5 mm ID Barrel
  • 6.3 OD x 3.0 ID center pin Barrel
  • 6.0 OD x 4.4 ID center pin Barrel
  • 7.4 mm OD x 5.0 center pin ID Barrel
  • 7.9 OD x 5.6 ID center pin Barrel


[Home] [PowerStream] [Site Map]
[Tech Resources]
[Policy and Privacy] [Contact Us]

Thank you for considering PowerStream

12V Storage battery charger 5.5 amps, switchmode variety, 12V battery chargers

PowerStream Technology
1163 South 1680 West
Orem, Utah 84058
USA

Phone: 801-764-9060
Fax: 801-764-9061

© Copyright 2000, 2002, 2003, 2004, 2005, 2006, 2008,2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Lund Instrument Engineering, Inc. All rights reserved.

Google Author Verification