March 4, 2025

6-cell lithium iron phosphate battery pack charger, 1.8A at 19.2 volts, with slow-start function and fuel gauge

More lithium iron phosphate battery chargers

6-cell lithium iron phosphate battery charger

This is a charger for 6-series LiFP battery pack, nominally 19.2V (6 x 3.2V), which charge at 21.9 volts (6 x 3.65V). The bulk charge current is 1800 mA. It is a multi-stage li-iron LiFePO4 recharger with universal AC input. Includes a slow start feature and a 4-segment fuel gauge.

These are state-of-the-art battery chargers that can be used on-demand, or left permanently on the battery for maintenance. The slow-start function helps battery cycle life, especially with deeply discharged batteries. The charger is fully isolated from the mains, has universal AC input, and a removable AC cord. Will accurately lithium-iron-phosphate packs.

PST-G60-12F6-B AKA PST-G60-24F6-B With barrel plug output		$53	Quantity 11+ $47	Quantity 51+ $41	Quantity 101+ $35	Quantity 251+ $31	Quantity 500+ $26
	Optional 18" alligator cord adapter	$3.25
SDY-C53F (ZHJX002)	For adapting the barrel connector version to screw terminals	$2.50 each
	PST-WX12 ---- Output adapter barrel plug kitSee Below	$7.00

General Information

Model	PST-G60-12F6
Function	19.2V (21.9V) Volt battery charger for Li-iron phosphate 6-cell batteries
Type	Battery charger for lithium packs. Can be left on the battery without causing damage, also useful for battery maintainer applications.

Technical Information

Rated input voltage	90-264 VAC, 50/60 Hz
Battery type	19.2V nominal 6-cell LFP battery
Input Frequency	50-60 Hz
Battery voltage	19.2 volts nominal
Battery size	3 AH to 30+ AH packs
Charging current	1.8Amps or 1800mA peak charge
Charger type	Constant Current/ Constant Voltage precision charger
Charging algorithm This is the "European" charge algorithm that does not float charge the battery at the last stage, but still keeps it maintained. (see the graph below)	Constant current/constant voltage
	Stage 1 slow start, pre-charge function for deeply discharged packs
	Stage 2 bulk charge stage. 1.8 amps is applied to the battery until the voltage rises to 21.9 volts
	Stage 4 constant voltage state until the charge current falls to 400mA
	Stage 5. The charger turns off.
Style	Desktop
Output power	36 W peak
Output voltage	21.9 volts maximum during charge
Size	120 x 67 x 41 mm, 4.7 x 2.6 x 1.6 inches
Weight	275 grams, 0.275 kg, 0.6 pounds, 9.7 oz.
Environment	-20°C to +50°C operating, -40°C to +70°C storage
Vibration, Impact	5mm, 50Hz, 600 Seconds, 1 meter drop 3 times
Output options included	5.5 mm OD x 2.1 mm ID barrel, center positive More barrel connector adapters available separately, see below
Safety	CE marked, designed to EN60950, GB4946, UL1950, certified and marked TUV
Protections	Over Voltage Protection, Output current protection, reverse polarity protection (auto-clearing), short circuit protection (auto-clearing)
Efficiency	>80%
HiPot, ESD	Hi-Pot 3000 V, 1 minute, ESD 8000V
MTBF	30,000 hours by MIL-STD calculation
Cooling	Natural convection, no fan
LED Indications	Power on, but no battery connected	Power LED red
	Slow start	The lowest green light is the only one on.
	Charging	Charging lights lit to show the state of charge
	Charged	All four green LEDs are on
	Reverse polarity, or shorted output	All lamps flash
	No battery connected	Red light is on, but no green LEDs

2.35 OD x 0.7 ID Barrel
3.0 OD x 1.1 ID Barrel
3.5 OD x 1.35 ID Barrel
4.0 OD x 1.7 ID Barrel
4.75 mm OD x 1.75 mm ID Barrel EIAJ-03
5.0 mm OD x 3.5 mm ID with center pin
5.5 mm OD x 1.5 mm ID type 2 Barrel
5.5 mm OD x 2.5 mm ID Barrel
6.3 OD x 3.0 ID center pin Barrel
6.0 OD x 4.4 ID center pin Barrel
7.4 mm OD x 5.0 center pin ID Barrel
7.9 OD x 5.6 ID center pin Barrel

Twelve optional DC Plugs slip over the 5.5 x 2.1 mm connector if desired.

Advantages:

Much lighter and smaller than transformer based lithium iron phosphate chargers

Universal Power Input

Available now

LIFP battery charger, 6-cell pack battery chargers

[Home] [PowerStream] [Site Map]
[Tech Resources] [Policy and Privacy] [Contact Us]

Thank you for considering PowerStream

PowerStream Technology 1163 South 1680 West Orem, Utah 84058 USA Phone: 801-764-9060 Fax: 801-764-9061
© Copyright 2000, 2002, 2003, 2004, 2005, 2006, 2008,2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 Lund Instrument Engineering, Inc. All rights reserved. Google Author Verification

6-cell lithium iron phosphate battery pack charger, 1.8A at 19.2 volts, with slow-start function and fuel gauge

This is a charger for 6-series LiFP battery pack, nominally 19.2V (6 x 3.2V), which charge at 21.9 volts (6 x 3.65V). The bulk charge current is 1800 mA. It is a multi-stage li-iron LiFePO4 recharger with universal AC input. Includes a slow start feature and a 4-segment fuel gauge.

PST-G60-12F6-B