|
PST-3P10-L1012 Li-ion Battery
Charger |
| |
ITEM |
UNIT |
SPECs |
REMARKS |
|
INPUT |
|
|
|
|
| |
Input Voltage |
Volts AC |
100 to 240VAC 50/60Hz |
|
| |
Input voltage range |
Volts AC |
90 to 264VAC |
|
| |
Input Current |
Amps |
0.2A rms |
Under the following test conditions:
INPUT:220V OUTPUT:Full load |
| |
Maximum input power |
Watts |
18 |
|
|
OUTPUT |
|
|
|
|
| |
Output voltage |
Volts DC |
12.6VDC |
|
| |
Output voltage compliance during charge
|
Volts DC |
9VDC to 12.7VDC |
|
| |
Battery Chemistry |
|
10.8V Lithium-ion or lithium polymer
(LiPo) |
|
| |
Current during the constant-current charge
phase |
Amps |
0.80 A (+0.2A) |
|
| |
Voltage during the constant-voltage charge
phase |
Volts |
12.6VDC (+-0.15V) |
|
| |
Charge current at which the end-of-charge
light comes on |
Amps |
<0.08 (80 milliamps) |
|
| |
Example of charge time for a specific
battery pack. |
hour |
4 to 5 hours |
Under the following test conditions: 1.8Ah
Li-ion pack, 25°C |
| |
Maximum output power |
Watts |
12W |
|
| |
Hold-on time during power
failure |
milliseconds |
20 ms |
|
| |
Ripple current |
milliamps |
50 mA |
Under the following test
conditions:
Input: 220VAC Output: Full load
|
| |
The charge will terminate under the
following conditions. |
|
V>12.4V and I<0.1A |
|
| |
LED schedule |
|
Red: charging
Green: finish/idle |
|
| |
Output short-circuit protect
|
· |
Yes |
|
| |
Typical Efficiency |
% |
>76% |
At maximum load |
|
Environment |
|
|
|
|
| |
Operating temperature range |
·C |
-10 to +40 |
Full load & natural convection.
|
| |
Operating humidity range |
%RH |
< +90 |
Relative humidity, non-condensing.
|
| |
Storage temperature |
°C |
-40°C to +70°C |
|
| |
Storage humidity |
%RH |
0% to +95% |
Relative humidity, non-condensing.
|
| |
Cooling method |
|
Natural convection |
|
| |
Vibration resistance |
|
5mm deflection, 50Hz frequency, for 600
seconds |
Under the following test conditions:
Non-operating |
| |
Impact resistance |
|
1 meter drop test 3 times or
more |
Under the following test conditions:
Non-operating |
|
Mechanical |
|
|
|
|
| |
Weight |
grams |
150g |
|
| |
Size |
millimeters |
75 X 51 X 28 mm |
Not including the cords |
| |
Size |
inches |
3 x 2 x 1.1 in. |
Not including the cords |
| |
Output Connectors |
|
5.5 x 2.1 mm barrel, others available on
special order in quantity |
Also see the connector kit below
|
|
Safety |
|
|
|
|
| |
Agency approvals |
|
cUL, CE |
ROHS available by special
order |
| |
Safety standards |
|
GB4943 UL1950 EN60950 |
|
| |
Maximum temperature increase above
ambient |
Degrees Centigrade |
< 40°C on casing |
At any line voltage within range and
maximum output load |
| |
EMC standard |
|
EN55022 B |
|
| |
MTBF |
hrs |
30000 |
|
| |
ESD |
kV |
8.0 |
|
| |
Hi-Pot Insulation |
V |
i/p to o/p: 3000 (1 min.) |
|
| |
Limited power source |
VA |
50 |
|
