Automotive and Vehicle Products

24V to 12V and 12V to 24V for using military or European vehicles or trailers with 12V or 24V vehicles

Battery isolator allows an auxiliary battery to be charged by the vehicle’s system, yet not participate in engine starting. It also prevents the starting battery from being run down by your equipment when the engine is off.

Converters 12VDC to 16VDC at 17.5 amps

8A 13.6 V continuous output with 5V to 8V input

This module charges an external battery at 400 mA and acts like a 36 watt DC UPS to keep equipment running in a vehicle even when the vehicle power fails. It is a controller for an automotive battery backup system.

A DC/DC UPS controller for 12 volt 5 amp applications includes drivers for LEDs or relays indicating the state of operation.

This module charges an external battery at 400mA from a wide range of input voltages, and acts like a 120 watt DC UPS to keep equipment running in a vehicle even when the vehicle power fails.

A DC/DC UPS and vehicle battery backup system for use in 24 volt cars, trucks and heavy equipment

Plugs into a car’s cigarette lighter power port and gives four USB charging ports, plus duplicates the car’s port.

A small DC/DC battery backup with 1.2 AH battery and 5A or 12A maximum pass through current

A slightly larger DC/DC battery backup having a 2.4AH battery and 5A or 12A pass through current

A 24V version of the DC/DC backup with a 1.2AH battery and 12A pass through

A robust 5 amp-hour battery backup for 12 volt vehicles

Several quality consumer grade car adapters for laptops

These charge sealed lead acid, SLA, gel cell, and VRLA, or even flooded lead acid batteries from 12 volt or 24 volt cars, batteries, fork lifts, etc.

Two models convert positive or negative ground 6 volt cars to 12 volts negative ground 12 volts negative ground to use modern electronics. PST-SR700-6 PSTC-0624012

In dealership showrooms it is often necessary to disconnect the car’s battery for safety reasons. This 6 thick case rolls under the car and has leads to connect to the car’s electronics so that the car’s electronics can be demonstrated.

Designed for wide temperature range operation -40 °C to 75 °C (-40 °F to 167 °F) and robust electrical features

For running 8.5 volt PS2 game stations in 12 volt cars

80 amp battery splitter, protector, or isolator

12VDC and 24VDC ballasts for 20W and 40W tubular lamps

For running a computer from a car, boat, solar panel or motorhome. The input range is 9-18 volts.

This load tester tests lead acid batteries and sealed lead acid batteries at up to 800 amps. This allows quick and easy testing of suspect batteries and charging systems under conditions that simulate a car starter.

For running a computer from a 24V vehicle, such as a truck, bus, boat, or earthmoving equipment.

These chargers can charge a 12 volt battery off of a high voltage electric vehicle battery bank, for example 110VDC, 250VDC, or 300V.

For charging 24VDC lead acid batteries from 110VDC, 250VDC, or 300VDC cars, cranes, or boats.

For operating 9 volt equipment in a car, bus, or boat, with 1.2A maximum output.